Both the DEV-3
and DEV-5
share the same basic design, but with a few important differences. Most notably, the Sony DEV-5 adds a built-in GPS receiver that allows it to tag images and video clips as they're saved, marking each with the location at which they were recorded. Compatible software such as the bundled Picture Motion Browser can then use this to indicate the shooting locations or display thumbnails on a map. The GPS functionality is also used to offer a map display function, although it isn't currently clear as to what level of detail or coverage this provides.
Front (left) and rear (right) views of the Sony DEV-3 / DEV-5 binoculars.Photos provided by Sony Electronics Inc.
Although both binoculars feature the
same optics with a still image magnification range from 0.9x to 10x, the
DEV-5 adds an additional digital zoom function that can double this to
an effective 20x magnification. The DEV-5 also has a more expansive
product bundle, which includes a lens cover, finder cap, large eye cups, a carrying case and a neck strap.
The Sony DEV-3
and DEV-5
feature Sony G-branded optics with a variable
aperture from F1.8 to F3.4 across the zoom range, and include the
company's Optical SteadyShot image stabilization with Active mode, which
provides a greater degree of correction than the standard Optical
Steadyshot. Note, though, that Active mode is only available at wide
angle when viewing or shooting in 3D mode, and you must switch to 2D
mode to gain Active mode at telephoto. Either binocular model is usable
in light down to 11 lux.
Behind
their optics, each model has a pair of Sony Exmor R
backside-illuminated CMOS image sensors, each with a 4.5mm diagonal and a
total resolution of approximately 4.2 megapixels. Data from these twin
sensors is handled by a Sony Bionz-branded image processor, and can
provide JPEG still images at resolutions up to an interpolated 7.1
megapixels. For image viewing, the DEV-3 and DEV-5 have dual 11mm
displays, each of which has a resolution of 852 x 480 pixels, with each
pixel comprising separate red, green and blue dots, for a total dot
count of 1,226,880 per eye. There's a -3.5 to +3.5 diopter adjustment,
14.3mm eye relief, a 35.6 degree, 16:9 field of view, and an adjustable
interpupilary distance of 55 to 75mm.
Two-dimensional
video capture is possible at up to 60 frames-per-second with a
progressive scan resolution of 1,920 x 1,080 pixels (aka 1080p / Full
HD), using MPEG-4 AVC / H.264 (AVCHD 2.0) compression.
Standard-definition capture is also possible at unspecified resolution,
using MPEG-2 Program Stream compression. 3D video capture uses Sony's
proprietary MVC format, with unspecified (but high definition)
resolution and frame rate. Movies include stereo Dolby Digital audio.
Right (top) and left (bottom) views of the Sony DEV-3 / DEV-5 binoculars.Photos provided by Sony Electronics Inc.
Data is recorded on Secure Digital
cards (including the higher capacity SDHC and SDXC types), or on Memory
Stick PRO Duo Mark 2 or PRO-HG Duo cards. Sony recommends use of Class 4
or higher SD cards. Power comes from a proprietary NP-FV70 lithium ion
rechargeable battery pack, rated as good for 155 minutes of 2D recording
on a charge. Connectivity includes a stereo headphone minijack,
high-definition HDMI or component video outputs, standard definition
composite video output, USB 2.0 High Speed data, and a DC input.
The
Sony DEV-3
and DEV-5
have what the company describes as a "stealth"
design which keeps external controls and markings to a minimum, reducing
the likelihood of wildlife being scared off by the user's movement.
Both models have the exact same size and fairly hefty weight, which
weighs some 2.65 pounds.